Product: Management and Development
https://pmd.igdp.org.br/article/doi/10.4322/pmd.2019.027
Product: Management and Development
Original Article

Project Lifecycle Management (PLM): evolution and state of the art

Daniela Silva dos Santos, Diane Aparecida Reis, André Leme Fleury

Downloads: 4
Views: 442

Abstract

Intelligent manufacturing has produced a revolutionary change, mainly driven by the current competitive world, reinforcing the importance of inserting Product Lifecycle Management (PLM) approach. PLM emerges with the aim of efficiently managing product-related information throughout the product lifecycle with sustainability. It also satisfies the interest in managing the services and products lifecycle, and in the case of products, their management, from their insertion in production processes, to their lifecycle end, generating a closed management cycle. This paper aims mainly to understand how the concept of PLM is being approached and defined by academics. For this, a systematic literature review with bibliometrics, networks and contents analysis were applied. The goal of this paper to evidencing the main PLM definitions, providing a comprehensive view of the current researches and raising knowledge gaps for future research about it.

Keywords

Product Lifecycle, Product Lifecycle Management (PLM), Lifecycle Management.

References

Abid, H., Pernelle, P., Noterman, D., Campagne, J., & Ben Amar, C. (2014). SysML approach for the integration of a mechatronics system within PLM systems. International Journal of Computer Integrated Manufacturing, 28(9), 972-998.

Adami-Sampson, M. (2007). Design for environmental compliance. Control Engineering, 54(2), 12-14.

Al-Ashaab, A., Molyneaux, M., Doultsinou, A., Brunner, B., Martínez, E., Moliner, F., Santamaría, V., Tanjore, D., Ewers, P., & Knight, G. (2012). Knowledge-based environment to support product design validation. Knowledge-Based Systems, 26, 48-60.

Alemanni, M., Alessia, G., Tornincasa, S., & Vezzetti, E. (2008). Key performance indicators for PLM benefits evaluation: the Alcatel Alenia Space case study. Computers in Industry, 59(8), 833-841.

Alemanni, M., Destefanis, F., & Vezzetti, E. (2010). Modelbased definition design in the product lifecycle management scenario. International Journal of Advanced Manufacturing Technology, 52(1-4), 1-14.

Alison, W. (2010). Controlling the lifecycle. Drapers, 26-27.

Allanic, M., Durupt, A., Eynard, B., Allanic, M., Joliot, M., Allanic, M., Brial, T., & Boutinaud, P. (2014). Towards enhancement of relationships browsing in mature PLM systems. IFIP Advances in Information and Communication Technology, 422(1), 345-354.

Allen, D. G., Hancock, J. I., Vardaman, J. M., & Mckee, D. N. (2014). Analytical mindsets in turnover research. Journal of Organizational Behavior, 35, 61-86.

meri, F., & Dutta, D. (2005). Product lifecycle management: closing the knowledge loops. Computer-Aided Design and Applications, 2(5), 577-590.

Anderson, A. (2002). From product first to better products. Msi, 20(10), 2A-8A.

Anišić, Z., Veža, I., Suzić, N., Sremčev, N., & Tekic, A. (2013). Improving product design with IPS-DFX methodology incorporated in PLM software. Tehnicki Vjesnik (Strojarski Fakultet), 20(1), 183-193.

Arslan, D. (2012). Examining first-grade teachers’ handwriting instruction. Educational Sciences: Theory and Practice, 12(4), 2839-2846.

Avventuroso, G., Silvestri, M., & Pedrazzoli, P. (2017). A networked production system to implement virtual enterprise and Product Lifecycle information loops. Ifacpapersonline, 50(1), 7964-7969.

Aziz, H., Gao, J., Maropoulos, P., & Cheung, W. M. (2005). Open standard, open source and peer-to-peer tools and methods for collaborative product development. Computers in Industry, 56(3), 260-271.

Bartholomew, D. (2004). The juice flows again. Industry Week, 253(3), 31-34.

Bartholomew, D. (2005). Manufacturers nibbling on PLM. Industry Week, 254(4), 63-64.

Barthorpe, S., Chien, H. J., & Jack, K. C. S. (2004). A survey of the potential for enterprise resource planning (ERP) in improving the effectiveness of construction management in the UK construction industry. International Journal of Computer Applications in Technology, 20(1-3), 120-128.

Baughey, K. (2009). The future of automotive design & amp; development: 3D for all. SAE International Journal of Materials and Manufacturing, 2(1), 258-264.

Bonou, A., Skelton, K., & Olsen, S. I. (2016). Ecodesign framework for developing wind turbines. Journal of Cleaner Production, 126, 643-653.

Borsato, M. (2014). Bridging the gap between product lifecycle management and sustainability in manufacturing through ontology building. Computers in Industry, 65(2), 258-269.

Borsato, M., Estorilio, C. C. A., Cziulik, C., Ugaya, C. M. L., & Rozenfeld, H. (2010). An ontology building approach for knowledge sharing in product lifecycle management. International Journal of Business and Systems Research, 4(3), 278-292.

Brezgin, V. I., Brodov, Y. M., Chubarov, A. A., & Brezgin, D. V. (2013). Modern technologies for rendering information support to cogeneration steam turbine units in their design and operation stages. Thermal Engineering, 60(8), 573-579.

Brière-Côté, A., Rivest, L., & Desrochers, A. (2010). Adaptive generic product structure modeling for design reuse in engineer-to-order products. Computers in Industry, 61(1), 53-65.

Brincheck, B. (2005). End-to-end 3-D PLM puts 2-D in its proper place. Design Engineering (London), 51(6), 26-28.

Bruno, G., Korf, R., Lentes, J., & Zimmermann, N. (2016). Efficient management of product lifecycle information through a semantic platform. International Journal of Product Lifecycle Management, 9(1), 45-64.

Brunsmann, J., Wilkes, W., Schlageter, G., & Hemmje, M. (2012). State-of-the-art of long-term preservation in product lifecycle management. International Journal on Digital Libraries, 12(1), 27-39.

Bruun, H. P. L., Mortensen, N. H., Harlou, U., Wörösch, M., & Proschowsky, M. (2015). PLM system support for modular product development. Computers in Industry, 67, 97-111.

Cáceres, M. S., Castillo, R. A., & Rosário, J. M. (2010). Digital manufacturing - Integration and collaborative industrial automation approach. International Review of Mechanical Engineering, 4(3), 336-345.

Cai, H., Xu, L., & Xu, B. (2014). IoT-Based configurable information service platform for Product Lifecycle Management. IEEE Transactions on Industrial Informatics, 10(2), 1558-1567.

Camarillo, A., Ríos, J., & Althoff, K. (2018). Knowledge-based multi-agent system for manufacturing problem solving process in production plants. Journal of Manufacturing Systems, 47, 115-127.

Camarillo, A., Ríos, J., & Althoff, K. D. (2017). CBR and PLM applied to diagnosis and technical support during problem solving in the Continuous Improvement Process of manufacturing plants. Procedia Manufacturing, 13, 987-994.

Cantamessa, M., Montagna, F., & Neirotti, P. (2012). Understanding the organizational impact of PLM systems: evidence from an aerospace company. International Journal of Operations & Production Management, 32(2), 191-215.

Cao, H., & Folan, P. (2011). Product life cycle: the evolution of a paradigm and literature review from 1950–2009. Production Planning and Control, 23(8), 641-662.

Cao, H., Folan, P., Mascolo, J., & Browne, J. (2009). RFID in product lifecycle management: a case in the automotive industry. International Journal of Computer Integrated Manufacturing, 22(7), 616-637.

Caro, E., Bolarin, F., & Chocano, J. (2011). Mejora del desarrollo de productos desde la perspectiva de gestión del conocimiento. Dyna Ingenieria e Industria, 86(3), 699-706.

Carvalho, M. M., Fleury, A., & Lopes, A. P. (2013). An overview of the literature on technology roadmapping (TRM): contributions and trends. Technological Forecasting and Social Change, 80(7), 1418-1437.

Case, L. (2006). Solution built on UGS’ teamcenter software drives dramatic cost savings for industries managing embedded software associated with electro-mechanical systems. Automotive Industries Ai, 186(4), 7.

Chen, H. H., Kang, H.-Y., Xing, X., Lee, A. H. I., & Tong, Y. (2008). Developing new products with knowledge management methods and process development management in a network. Computers in Industry, 59(2-3), 242-253.

Chiappinelli, C. (2008). Lean + technology = lean2. Managing Automation, 23(12), 36-38.

Chungoora, N., Young, R. I., Gunendran, G., Palmer, C., Usman, Z., Anjum, N. A., Cutting-Decelle, A. F., Harding, J. A., & Case, K. (2013). A model-driven ontology approach for manufacturing system interoperability and knowledge sharing. Computers in Industry, 64(4), 392-40.

Cole, M. D. (2009). PLM for C2M. Apparel, 50(6), 31-33.

Courtney, M. (2014). Keeping track [Product lifecycle management software]. Engineering & Technology, 9(12), 64-66.

Crawford, C. (2006). O PLM or not to PLM? That is the question. AATCC Review, 6(9), 24-26.

Cui, J., Qi, G. N., Ji, Y. J., Gu, Q. X., Su, S. H., & Hu, H. (2008). Customer requirement based on customer architecture hierarchy and BP in product lifecycle management system. Journal of Zhejiang University, 42(3), 528-533.

Cummings, T. (2006). Get your data in order. Control Engineering, 53(10)

D’Avolio, E., Bandinelli, R., & Rinaldi, R. (2017). A processoriented framework for PLM implementation in fashion companies. International Journal of Product Lifecycle Management, 109(3), 191-209.

Demoly, F., Dutartre, O., Yan, X., Eynard, B., Kiritsis, D., & Gomes, S. (2013). Product relationships management enabler for concurrent engineering and product lifecycle management. Computers in Industry, 64(7), 833-848.

Demoly, F., Matsokis, A., & Kiritsis, D. (2012). A mereotopological product relationship description approach for assembly oriented design. Robotics and Computerintegrated Manufacturing, 28(6), 681-693.

Demoly, F., Monticolo, D., Eynard, B., Rivest, L., & Gomes, S. (2010). Multiple viewpoint modeling frameworks enabling integrated product–process design. International Journal on Interactive Design and Manufacturing, 4(4), 269-280.

Demoly, F., Toussaint, L., Eynard, B., Kiritsis, D., & Gomes, S. (2011b). Geometric skeleton computation enabling concurrent product engineering and assembly sequence planning. Computer Aided Design, 43(12), 1654-1673.

Demoly, F., Yan, X.-T., Eynard, B., Rivest, L., & Gomes, S. (2011a). An assembly oriented design framework for product structure engineering and assembly sequence planning. Robotics and Computer-integrated Manufacturing, 27(1), 33-46.

Denkena, B., Shpitalni, M., Kowalski, P., Molcho, G., & Zipori, Y. (2007). Knowledge management in process planning. CIRP Annals, 56(1), 175-180.

Dhuieb, M. A. (2014). Interoperability framework for supporting information-based assistance in the factory. IFIP Advances in Information and Communication Technology, 442(1), 201-310.

Dikici, A., Turetken, O., & Demirors, O. (2018). Factors influencing the understandability of process models: A systematic literature review. Information and Software Technology, 93, 112-129.

Ding, L., Ball, A., Patel, M., Mullineux, G., & Matthews, J. (2011). Lightweight product lifecycle information management for small enterprises. International Journal of Product Lifecycle Management, 5(1), 21-36.

Ducellier, G., Yvars, P., & Eynard, B. (2014). Managing design change order in a PLM platform using a CSP approach. International Journal on Interactive Design and Manufacturing, 8(3), 151-158.

El Souri, M., Gao, J., Owodunni, O., Simmonds, C., & Martin, N. (2017). A structured approach to defect data management for improving DFM implementation in aerospace manufacturing. International Journal of Product Lifecycle Management, 10(4), 282-300.

Essop, I. A., Evans, R. D., Wan, S., Giddaluru, M. P., Gao, J. X., Baudry, D., Mahdikhah, S., & Messaadia, M. (2016). Investigation into current industrial practices relating to product lifecycle management in a multi-national manufacturing company. Computer-Aided Design and Applications, 13(5), 647-661.

Eynard, B., Troussier, N., & Carratt, B. (2010). PLM-based certification process in aeronautics extended enterprise. International Journal of Manufacturing Technology and Management, 19(3-4), 312-329. http://dx.doi.org/10.1504/ ijmtm.2010.031376.

Falkiewicz, Ö. (2011). Electrical computer-aided engineering (E-CAE) software. Intech, Research Triangle, 58(3-4), 1-4.

Farish, M. (2008). Joined-up planning [product lifecycle management]. Engineering & Technology, 3(21), 61-63. Farish, M. (2012). Word on the street. Engineering (London), 253(2), 8-9.

Feng, Q., Ren, Y., Zeng, S.-K., & Sun, B. (2009). Ontologybased multi-view modeling for integrated product development. Jisuanji Jicheng Zhizao Xitong, 15(4), 633- 638.

Feng, Q., Sun, B., Ren, Y., & Zeng, S.-K. (2010). Modeling method for product comprehensive design process and its realization. Computer Integrated Manufacturing Systems – CIMS, 16(4), 772-782.

Forcinio, H. (2007). Going green. Managing Automation, 22(4), 48-51.

Fortineau, V., Paviot, T., & Lamouri, S. (2013). Improving the interoperability of industrial information systems with description logic-based models - The state of the art. Computers in Industry, 64(4), 363-375.

Fortineau, V., Talhi, A., Paviot, T., & Lamouri, S. (2017). DALTON: a generic meta-model to support business rules and requirements engineering in a PLM system. IFAC – Papers Online, 50(1), 7272-7277.

Främling, K., Ala-Risku, T., Kärkkäinen, M., & Holmström, J. (2006). Agent-based model for managing composite product information. Computers in Industry, 57(1), 72-81.

Främling, K., Holmström, J., Loukkola, J., Nyman, J., & Kaustell, A. (2013). Sustainable PLM through Intelligent Products. Engineering Applications of Artificial Intelligence, 26(2), 789-799.

Främling, K., Kubler, S., & Buda, A. (2014). Universal messaging standards for the IoT from a lifecycle management perspective. Ieee Internet of Things Journal, 1(4), 319-327.

Garcia, P. B., & Fan, I. S. (2008). Practitioner requirements for integrated knowledge-based engineering in Product Lifecycle Management. International Journal of Product Lifecycle Management, 3(1), 3-20.

Golovatchev, J. D., Budde, O., & Hong, C. G. (2010). Integrated PLM-process-approach for the development and management of telecommunications products in a multi-lifecycle environment. International Journal of Manufacturing Technology and Management, 19(3-4), 224-237.

Gomes, S., Varret, A., Bluntzer, J. B., & Sagot, J. C. (2009a). Functional design and optimization of parametric CAD models in a knowledge-based PLM environment. International Journal of Product Development, 9(1-3), 60-77.

Gomes, S., Monticolo, D., Hilaire, V., & Eynard, B. (2009b). Content management based on multi-agent system for collaborative design. International Journal of Product Development, 8(2), 178-192.

Gort, A. (2015). Improving your product launch success. Industry Week, 254(4), 61-1.

Granros, R. (2009). Regulatory compliance for food safety. Control Engineering, 56(10)

Gulledge, T., & Simon, G. (2009). Innovation and transformation using product lifecycle management enabled by NetWeaver. International Journal of Innovation and Learning, 6(1), 15-32.

Hachani, S., Gzara, L., & Verjus, H. (2013). A service-oriented approach for flexible process support within enterprises: application on PLM systems. Enterprise Information Systems, 7(1), 79-99.

Hachani, S., Verjus, H., & Gzara, L. (2012). Support of product design processes flexibility in PLM systems using a service-based approach. International Journal of Services Operations and Informatics, 7(4), 313-329.

Hazen, B. T., Overstreet, R. E., & Boone, C. A. (2015). Suggested reporting guidelines for structural equation modeling in supply chain management research. International Journal of Logistics Management, 26(3), 627-641.

Hincapié, M., De Jesús Ramírez, M., Valenzuela, A., & Valdez, J. A. (2014). Mixing real and virtual components in automated manufacturing systems using PLM tools. International Journal on Interactive Design and Manufacturing, 8(3)209- 230.

Holzer, D. (2014). Fostering the link from PLM to ERP via BIM the aec industry in transition. IFIP Advances in Information and Communication Technology, 442, 75-82.

Huang, G. Q., Wright, P. K., & Newman, S. T. (2009). Wireless manufacturing: a literature review, recent developments, and case studies. International Journal of Computer Integrated Manufacturing, 22(7), 579-594.

Hughes, D., & Taverna, M. A. (2004). Expanding the digital envelope. Aviation Week and Space Technology, 160(19), 50-52.

Ibrahim, R., & Paulson, B. C. (2008). Discontinuity in organizations: identifying business environments affecting efficiency of knowledge flows in Product Lifecycle Management. International Journal of Product Lifecycle Management, 3(1), 21-36.

Ilieva, I., Meier, G., Schubert, P., & Ovtcharova, J. (2009). Integration of Product Lifecycle Management (PLM) and Multi Project Management: toward increasing transparency in product development. Zwf Zeitschrift Fuer Wirtschaftlichen Fabrikbetrieb, 104(11), 931-936.

Iosif, G., Iordache, I., Stoica, V., Luchian, A. M., Costea, E., Suciu, G., & Suciu, V. (2018). Achieving a more electric aircraft: a comparative study between the concurrent and traditional engineering models. Incas Bulletin, 10(1), 221- 228.

Johnson, C., & Gavilanes, J. (2003). Quick and below budget. Intech, Research Triangle, 50(5), 51-54.

Joshi, N., & Dutta, D. (2008). Managing extended producer responsibility using PLM part 2: identification of joints for end-of-life treatment planning. Computer-Aided Design and Applications, 5(6), 764-773.

Jun, H., Kiritsis, D., & Xirouchakis, P. (2007). Research issues on closed-loop PLM. Computers in Industry, 58(8- 9), 855-868.

Jun, H.-B., Shin, J.-H., Kim, Y.-S., Kiritsis, D., & Xirouchakis, P. (2009). A framework for RFID applications in product lifecycle management. International Journal of Computer Integrated Manufacturing, 22(7), 595-615.

Kahlert, T., & Rezaie, A. (2005). Reporting-Strategien für PLM-Umgebungen. Zwf Zeitschrift Für Wirtschaftlichen Fabrikbetrieb, 100(9), 520-523.

Kang, L. (2008). Microfluidics for drug discovery and development: from target selection to product lifecycle management. Drug Discovery Today, 13(1-2), 1-13.

Kärkkäinen, H., & Silventoinen, A. (2016). What is product lifecycle management (PLM) maturity? Analysis of current PLM maturity models. Journal of Modern Project Management, 3(3), 96-103.

Kiritsis, D. (2011). Closed-loop PLM for intelligent products in the era of the Internet of things. Computer Aided Design, 43(5), 479-501.

Kolle, S. R., Shankarappa, T. H., Arun, M., & Reddy, T. B. M. (2017). Characteristics and trends in global lead removal research: a science citation index expanded-based analysis. Desalination and Water Treatment, 80, 164-173.

Kubler, S., Derigent, W., Voisin, A., Thomas, A., & Rondeau, É. (2014). Method for embedding context-sensitive information on “communicating textiles” via fuzzy AHP. Journal of Intelligent & Fuzzy Systems, 26(2), 597-610. http://dx.doi.org/10.3233/ifs-120753.

Kubler, S., Derigent, W., Främling, K., Thomas, A., & Rondeau, É. (2015a). Enhanced Product Lifecycle Information Management using “communicating materials”. Computer Aided Design, 59, 192-200.

Kubler, S., Främling, K., & Derigent, W. (2015b). P2P Data synchronization for product lifecycle management. Computers in Industry, 66, 82-98.

Kultyshev, A. Y., Blagodarev, A. A., Gladkii, A. V., & Shanturov, D. N. (2013). The experience of implementing and using the Windchill product lifecycle management system at the energy machine building enterprise. Thermal Engineering, 60(8), 559-566.

Lazarevic, M., Ostojic, G., Cosic, I., Stankovski, S. V., Vukelic, D., & Zecevic, I. (2011). Product Lifecycle Management (PLM) methodology for product tracking based on RadioFrequency Identification (RFID) technology. Scientific Research and Essays, 6(22), 4776-4787.

Le Duigou, J. L., Bernard, A., & Perry, N. (2011). Framework for Product Lifecycle Management integration in small and medium enterprises networks. Computer-Aided Design and Applications, 8(4), 531-544.

Lee, S. G., Ma, Y.-S., Thimm, G. L., & Verstraeten, J. (2008a). Product Lifecycle Management in aviation maintenance, repair and overhaul. Computers in Industry, 59(2-3), 296- 303.

Lee, Y., Sheu, L., & Tsou, Y. (2008b). Quality function deployment implementation based on Fuzzy Kano model: an application in PLM system. Computers & Industrial Engineering, 55(1), 48-63.

Legardeur, J., Merlo, C., & Fischer, X. (2006). An integrated information system for product design assistance based on artificial intelligence and collaborative tools. International Journal of Product Lifecycle Management, 1(3), 211-229.

Li, H.-F., & Wu, H.-Z. (2005). Design and implementation of PLM based on meta-model driven. Jisuanji Jicheng Zhizao Xitong, 7, 963-968.

Li, J., Tao, F., Cheng, Y., & Zhao, L. (2015). Big Data in product lifecycle management. International Journal of Advanced Manufacturing Technology, 81(1-4), 667-684.

Li, X.-S., & Qi, G.-N. (2008). Integrated product model to support implementation of product lifecycle management. Journal of Zhejiang University, 42(3), 418-424.

Liao, X., & Zhang, L. (2005). Access control model for workflow management system for PLM. Jisuanji Jicheng Zhizao Xitong, 11(10), 1367-1371.

Lin, W.-T., Wang, S.-T., Li, M.-H., Huang, J.-M., & Chen, W.- K. (2011). Modular fiber optic cable product architecture for application in Product Lifecycle Management. Information Technology Journal, 10(1), 16-28.

Löwer, M., & Heller, J. E. (2014). PLM reference model for integrated idea and innovation management. IFIP Advances in Information and Communication Technology, 422(1), 257-266.

Lundin, M., Lejon, E., Dagman, A., Näsström, M., & Jeppsson, P. (2017). Efficient design module capture and representation for product family reuse. Journal of Computing and Information Science in Engineering, 17(3)

Maier, F., Meyer, M., & Steinbereithner, M. (2016). Nonprofit organizations becoming business-like: A systematic review. Nonprofit and Voluntary Sector Quarterly, 45(1), 64-86.

Marchetta, M. G., Mayer, F., & Forradellas, R. Q. (2011). A reference framework following a proactive approach for Product Lifecycle Management. Computers in Industry, 62(7), 672-683.

Marconnet, B., Demoly, F., Monticolo, D., & Gomes, S. (2017). An assembly oriented design and optimization approach for mechatronic system engineering. International Journal for Simulation and Multidisciplinary Design Optimization, 8(4), A7.

Marucheck, A., Greis, N., Mena, C., & Cai, L. (2011). Product safety and security in the global supply chain: Issues, challenges and research opportunities. Journal of Operations Management, 29(7-8), 707-720.

Matsokis, A., & Kiritsis, D. (2010). An ontology-based approach for Product Lifecycle Management. Computers in Industry, 61(8), 787-797.

Matsokis, A., & Kiritsis, D. (2011). Ontology applications in PLM. International Journal of Product Lifecycle Management, 5(1), 84-97.

Mejía, R. G., Echeverri, C. M. C., Montoya, J. E. C., & Álzate, A. F. G. (2016). Implementation of methodology of maintenance of molds of injection supported in tools of Product Lifecycle Management (PLM). Espacios, 37(25), 1-20.

Meloni, W. (2017). Growing by design. Computer Graphics World, 32-34.

Meng, X., Zhang, X., Ning, R., & Song, Y. (2008). Enterprise integration platform based on service-oriented architecture. Chinese Journal of Mechanical Engineering, 21(3), 36-40.

Ming, X. G., Yan, J. Q., Wang, X. H., Li, S. N., Lu, W. F., Peng, Q. J., & Ma, Y. S. (2008). Collaborative process planning and manufacturing in product lifecycle management. Computers in Industry, 59(2-3), 154-166.

Mo, R., Qiao, Y.-W., Chang, Z.-Y., Shi, Y., & Chen, Z.-F. (2010). Validation informatization based on product lifecycle management-teamcenter. Jisuanji Jicheng Zhizao Xitong, 16(7), 1458-1464.

Nathan, S. (2009). Fast lane to production vehicle manufacturers are implementing PLM systems to better integrate development and manufacturing. Engineer, 294(7781), 38-40.

Navarro, R., Tiwari, A., & Turner, C. (2013). Improving product lifecycle management implementations by applying ‘lean’ principles. International Journal of Product Lifecycle Management, 6(4), 357-380.

Neely, A. (2005). The evolution of performance measurement research: developments in the last decade and a research agenda for the next. International Journal of Operations & Production Management, 25(12), 1264-1277.

Neil, S. (2009). A work in progress. Managing Automation, 24(4), 14-21.

Paavel, M., Karjust, K., & Majak, J. (2017). Development of a product lifecycle management model based on the fuzzy analytic hierarchy process. Proceedings of the Estonian Academy of Sciences, 66(3), 279-286.

Palmarini, R., Erkoyuncu, J. A., Roy, R., & Torabmostaedi, H. (2018). Systematic review of augmented reality applications in maintenance. Robotics and Computer-integrated Manufacturing, 49, 215-228.

Palmer, D. (2004). No-one pretends this is easy. Manufacturing Computer Solutions, 10(3), 35-36.

Piancastelli, L., Frizziero, L., Donnici, G., Di Giacomo, G., & Gattii, A. (2015). Optimized FSI flow simulation using modern up-to-date software systems: A direct comparison between simulated and tunnel results. Journal of Engineering and Applied Sciences (Asian Research Publishing Network), 10(20), 9174-9182.

Pinna, C., Plo, L., Robin, V., Girard, P., & Terzi, S. (2017). An approach to improve implementation of PLM solution in food industry - case study of Poult Group. International Journal of Product Lifecycle Management, 10(2), 151-170.

Pitcher, G. (2005). From cradle to grave. New Electronics, 38(7), 42-43.

Polcar, J., & Horejsi, P. (2015). Knowledge acquisition and cybersickness: a comparison of VR devices in virtual tours. Mm Science Journal, 2015(2), 613-616.

Portillo-Barco, C., & Charnley, F. (2015). Data requirements and assessment of technologies enabling a product passport within products exposed to harsh environments: a case study of a high pressure nozzle guide vane. International Journal of Product Lifecycle Management, 8(3), 253-282.

Pullin, J. (2013). Making connections. Environmental Engineering, 26(2), 39-41.

Qiu, M., Chen, G., & Dong, J.-X. (2015). Ontology based adaptive product lifecycle management system. Computer Integrated Manufacturing Systems - CIMS, 11(6), 825-830.

Rachuri, S., Subrahmanian, E., Bouras, A., Fenves, S. J., Foufou, S., & Sriram, R. D. (2008). Information sharing and exchange in the context of product lifecycle management: role of standards. Computer Aided Design, 40(7), 789-800.

Ramos-Rodríguez, A., & Ruíz-Navarro, J. (2004). Changes in the intellectual structure of strategic management research: a bibliometric study of the strategic management journal, 1980-2000. Strategic Management Journal, 25, 981-1004.

Ryan, T. J. (2003). Coming on strong. Apparel, 44(8), 27-32.

Sassanelli, C., Pezzotta, G., Pirola, F., Sala, R., Margarito, A., Lazoi, M., Corallo, A., Rossi, M., & Terzi, S. (2018). Using design rules to guide the PSS design in an engineering platform based on the product service lifecycle management paradigm. International Journal of Product Lifecycle Management, 11(2), 91-115.

Savino, M. M., Mazza, A., & Ouzrout, Y. (2012). PLM Maturity model: a multi-criteria assessment in southern Italy companies. International Journal of Operations and Quantitative Management, 18(3), 159-180.

Schmitt, P. (2007). PLM in aerospace. Manufacturing Engineering, 138(3).

Schuh, G., Rozenfeld, H., Assmus, D., & Zancul, E. (2008). Process oriented framework to support PLM implementation. Computers in Industry, 59(2-3), 210-218.

Seibert, B. (2005). Design agility achieved with PDM/PLM. Apparel, 46(9), 22-26.

Sharma, A. (2005). Collaborative product innovation: integrating elements of CPI via PLM framework. Computer Aided Design, 37(13), 1425-1434.

Shelley, T. (2007). Controlling change. Manufacturing Computer Solutions, 13(5), 28-29.

Shen, J.-X., & Zhou, R.-R. (2003). Research on PLM system framework and key technologies. Journal of Nanjing University of Aeronautics and Astronautics, 35(5), 565-571.

Shi, J.-G., Si, H., Wu, G., Su, Y., & Lan, J. (2018). Critical factors to achieve dockless bike-sharing sustainability in China: A stakeholder-oriented network perspective. Sustainability, 10(6)

Simonova, L. A., & Khisamutdinov, M. R. (2013). Scientific - industrial aspects of integration product lifecycle management and enterprise resource planning systems. World Applied Sciences Journal, 25(4), 690-693.

Skarka, W. (2005). Contemporary problems connected with including Standard for the Exchange of Product Model Data (ISO 10303 - STEP) in designing ontology using UML and XML. Computer Assisted Mechanics and Engineering Sciences, 12(2-3), 231-246.

Sodhro, A. H., Pirbhulal, S., & Sangaiah, A. K. (2018). Convergence of IoT and product lifecycle management in medical health care. Future Generation Computer Systems, 86, 380-391.

Soto-Acosta, P., Placer-Maruri, E., & Perez-Gonzalez, D. (2016). A case analysis of a product lifecycle information management framework for SMEs. International Journal of Information Management, 36(2), 240-244.

Spera, J. (2008). Manufacturing steps onto the enterprise IT stage. Circuits Assembly, 19(6), 28-29.

Srinivasan, V. (2011). An integration framework for product lifecycle management. Computer Aided Design, 43(5), 464-478.

Sriti, M.-F., Assouroko, I., Ducellier, G., Boutinaud, P., & Eynard, B. (2015). Ontology-based approach for product information exchange. International Journal of Product Lifecycle Management, 8(1), 1-23.

Stark, J. (2011). Product Lifecycle Management. Decision Engineering, 1-562.

Stelzer, R., Petermann, D., Saske, B., & Steger, W. (2009). Collaboration environment for computer aided design virtual reality (CAD-VR). Zwf Zeitschrift Fuer Wirtschaftlichen Fabrikbetrieb, 104(1-2), 89-93.
 
Stephens, S. (2006). PLM and steam generator replacement at SONGS. Nuclear News, 49(11), 47-50.

Sudarsan, R., Fenves, S. J., Sriram, R. D., & Wang, F. (2005). A product information modeling framework for product lifecycle management. Computer Aided Design, 37(13), 1399-1411.

Tait, N. (2006). From point of conception to the point of sale: PLM - Yet another three letter acronym? Textile Network, 9, 40-43.

Takey, S. M., & Carvalho, M. M. (2016). Fuzzy front end of systemic innovations: a conceptual framework based on a systematic literature review. Technological Forecasting and Social Change, 111, 97-109.

Talhi, A., Huet, J.-C., Fortineau, V., & Lamouri, S. (2015). Toward an ontology-based architecture for cloud manufacturing. In T. Borangiu, A. Thomas & D. Trentesaux (Eds.), Service Orientation in Holonic and Multi-agent Manufacturing. Studies in Computational Intelligence (pp. 187-195, Vol. 594). Cham: Springer.

Tang, D., & Qian, X. (2008). Product lifecycle management for automotive development focusing on supplier integration. Computers in Industry, 59(2-3), 288-295.

Tang, G., & Hu, L. (2015). A medical devices management information system supporting full life-cycle process management. Chinese Journal of Medical Instrumentation, 34(4), 304-308.

Taverna, M. A. (2004). New-fangled Falcon. Aviation Week and Space Technology, 161(14), 62-64.

Taverna, M. A. (2017). Time saver. Aviation Week and Space Technology (New York), 166(19), 60-61.

Teresko, J. (2004). Making a pitch for PLM. Industry Week, 253(8), 57-62.

Thilmany, J. (2011). Project and lifecycle together. Mechanical Engineering (New York, N.Y.), 133(2)

Tinham, B. (2003). Collaboration to slash 20% costs at Kvaerner. Manufacturing Computer Solutions, 9(1), 28-29.

Tinham, B. (2004). PLM: evolving tools for an evolving market? Manufacturing Computer Solutions, 10(4), 24-26.

Tran, A. (2006). Wanfeng auto holding group selects UGS’ teamcenter express for cPDM. Automotive Industries Ai, 186(11), 1-1.

Trappey, A. J. C., & Hsiao, D. W. (2008). Applying collaborative design and modularized assembly for automotive ODM supply chain integration. Computers in Industry, 59(2-3), 277-287.

Trotta, M. G. (2010). Product lifecycle management: sustainability and knowledge management as keys in a complex system of product development. Journal of Industrial Engineering and Management, 3(2), 309-322.

Vadoudi, K., Bratec, F., & Troussier, N. (2017). A GIS-oriented semantic data model to support PLM for DfS. International Journal of Product Lifecycle Management, 10(3), 210-230.

Venkatasubramanian, V. (2005). Prognostic and diagnostic monitoring of complex systems for product lifecycle management: challenges and opportunities. Computers & Chemical Engineering, 29(6), 1253-1263.

Venugopalan, S. R., Ganesh, L. S., & Sai, L. P. (2012). Deployment maturity assessment of product lifecycle management systems: A study in Indian industries. International Journal Of Product Lifecycle Management, 6(2), 178-210.

Vezzetti, E., Moos, S., & Kretli, S. (2011). A product lifecycle management methodology for supporting knowledge reuse in the consumer packaged goods domain. Computer Aided Design, 43(12), 1902-1911.

Vieira, D. R., Vieira, R. K., & Chain, M. C. (2016). Elements of managerial integration for sustainable product lifecycle management. International Journal of Product Lifecycle Management, 9(2), 87-107.

Vila, C., Ugarte, D., Ríos, J., & Abellán, J. V. (2017). Projectbased collaborative engineering learning to develop Industry 4.0 skills within a PLM framework. Procedia Manufacturing, 13, 1269-1276.

Von Buchstab, V. (2003). ABCs of CAD oversell. Design Engineering (London), 49(4)

Walker, A. J., & Cox, J. J. (2008). Incorporating global characteristic data into virtual product development models. Computer-Aided Design and Applications, 5(6), 900-920.

Wan, J., Tang, S., Li, D., Wang, S., Liu, C., Abbas, H., & Vasilakos, A. V. (2017). A manufacturing big data solution for active preventive maintenance. IEEE Transactions on Industrial Informatics, 13(4), 2039-2047.

Wang, C.-F., & Xu, Y.-Q. (2005). Research on PLM for green manufacturing and its key technology. Zhuzao/foundry, 54(2), 108-111.

Wasike, B. (2017). Africa rising: an analysis of emergent Africa-focused mass communication scholarship from 2004 to 2014. International Journal of Communication, 11, 198-219.

Waurzyniak, P. (2014). Connecting the digital world with the factory floor: new collaborative 3D plant process planning and visualization tools are helping manufacturers prove out PLM’s promise. Manufacturing Engineering, 154(4), 53-64.

Waurzyniak, P. (2015a). Programming ingenuity into manufacturing system: new software advances help manufacturers inject creativity and vision into their factoryfloor processes. Manufacturing Engineering, 154(10), 3-9.

Waurzyniak, P. (2015b). Redefining PLM. Manufacturing Engineering, 154(9), 117-126. Waurzyniak, P. (2017). PLM’s digital twins offer virtual view of manufacturing. Manufacturing Engineering, 158(4), 67-73.

Wiens, D. (2006). Juggling WIP. New Electronics, 39(15), 38-39.

Wong, K. (2006). We gather today to join ERP and PLM: marrying enterprise data to product data. Cadalyst, 23(9), 42-44.

Woods, T. (2005). Life aid. Engineering (London), 246(5), 38-39.

Yataganbaba, A., Ozkahraman, B., & Kutbas, I. (2017). Worldwide trends on encapsulation of phase change materials: a bibliometric analysis (1990-2015). Applied Energy, 185, 720-731.

Yoo, M.-J., Um, J., Stroud, I., El Kadiri, S., & Kiritsis, D. (2014). Integration of design intent during the product lifecycle management. IFIP Advances in Information and Communication Technology, 442, 101-110.

Young, C. (2012). Bridging the data divide. IBM Data Management Magazine, 6, 14.

Young, R. I. M., Gunendran, A. G., Cutting-Decelle, A. F., & Gruninger, M. (2007). Manufacturing knowledge sharing in PLM: a progression towards the use of heavyweight ontologies. International Journal of Production Research, 45(7), 1505-1519.

Yu, H., Wei, Y., Tang, B., Mi, Z., & Pan, S. (2016). Assessment on the research trend of low-carbon energy technology investment: a bibliometric analysis. Applied Energy, 184, 960-970.

Yu, Y., Yan, J.-W., & Liu, M. (2010). Ontology mapping approach oriented to product information collaboration. Jisuanji Jicheng Zhizao Xitong, 16(5), 1111-1119.

Zhang, H., Ouzrout, Y., Bouras, A., & Savino, M. M. (2014). Sustainability consideration within product lifecycle management through maturity models analysis. International Journal of Services and Operations Management, 19(2), 151-171.

Zhang, M.-J. Wang, Q.-H., Mo, X.-N., & Zhang, L. (2011). Performance evaluation method for product lifecycle management. Jisuanji Jicheng Zhizao Xitong, 17(2), 362-368.

Zhang, Y., Ren, S., Liu, Y., & Si, S. (2017a). A big data analytics architecture for cleaner manufacturing and maintenance processes of complex products. Journal of Cleaner Production, 142(2), 626-641.

Zhang, Y., Ren, S., Liu, Y., Sakao, T., & Huisingh, D. (2017b). A framework for Big Data driven product lifecycle management. Journal of Cleaner Production, 159, 229-240.

Zhao, W.-B., Jeong, J.-W., Noh, S. D., & Yee, J. T. (2015). Energy simulation framework integrated with green manufacturing-enabled PLM information model. International Journal of Precision Engineering and Manufacturing-Green Technology, 2(3), 217-224.

Zhu, H., Gao, J., Li, D., & Tang, D. (2012). A web-based product service system for aerospace maintenance, repair and overhaul services. Computers in Industry, 63(4), 338-348.

Zhu, W., Bricogne, M., Durupt, A., Remy, S., Li, B., & Eynard, B. (2016). implementations of model based definition and Product Lifecycle Management technologies: a case study in Chinese aeronautical industry. IFAC – Papers Online, 49(12), 485-490.

Zscheile, F. (2017). From machine files to maintenance history files. Productivity Management, 22(1), 62-65.

5fbd54bd0e88253558004093 pmd Articles
Links & Downloads

Product

Share this page
Page Sections