Product: Management and Development
https://pmd.igdp.org.br/article/doi/10.4322/pmd.2019.010
Product: Management and Development
Original Article

Analysis and targeting of waste paper/polyester composites after weathering

Jussara Smidt Porto, Clarissa Coussirat Angrizani, Eliana Paula Calegari, Sandro Campos Amico, Lauren da Cunha Duarte

Downloads: 1
Views: 74

Abstract

This paper focuses on the investigation of degradation effects from the environment on waste paper/polyester composites. The materials were analyzed according to visual aspects, mass gain and mechanical properties. The composites subjected to aging were influenced by moisture absorption from the particles, with a deleterious effect also on particle/matrix interface, decreasing tensile and flexural strength of the composite. This same phenomenon lead to a positive effect on impact strength and reduction in hardness of the composites, since moisture absorption was limited and the material became slightly tougher. Moisture absorption also caused an increase in elastic modulus of the matrix. Based on all results, the developed material was found not suitable for external use.

Keywords

waste paper, composite, aging, mechanical properties.

References

AFFZAN, M. H. et al. The effects of natural weathering on the properties of pultruded natural fiber reinforced unsaturated polyester composites. Materials Characterization VI, v. 77, p. 333-342, 2013.

AKIL, H. M. et al. Environmental effects on the mechanical behavior of pultruded jute / glass fiber-reinforced polyester hybrid composites. Composites Science and Technology, v. 94, p. 62-70, 2014.

AKIL, H. M. et al. Water absorption study on pultruded jute fiber reinforced unsaturated polyester composites. Composites Science and Technology, v. 69, p. 1942-1948, 2009.

ALBUQUERQUE, A. C. et al. Effect of wettability and aging conditions on the physical and mechanical properties of uniaxially oriented jute-roving-reinforced polyester composites. Composites Science and Technology, v. 60, p. 833-844, 2000.

AMERICA SOCIETY FOR TESTING AND MATERIALS – ASTM. ASTM D256: standard test methods for determining the izod pendulum impact resistance of plastics. West Conshohocken: ASTM International, 2010.

AMERICA SOCIETY FOR TESTING AND MATERIALS – ASTM. ASTM D1435: standard practice for outdoor weathering of plastics. West Conshohocken: ASTM International, 2013.

AMERICA SOCIETY FOR TESTING AND MATERIALS – ASTM. ASTM D2240: standard test methods for standard test method for rubber property—durometer hardness. West Conshohocken: ASTM International, 2015.

AMERICA SOCIETY FOR TESTING AND MATERIALS – ASTM. ASTM D3039: standard test method for tensile properties of polymer matrix composite materials. West Conshohocken: ASTM International, 2017a.

AMERICA SOCIETY FOR TESTING AND MATERIALS – ASTM. ASTM D790: standard test methods for flexural properties of unreinforced and reinforced plastics and electrical insulating materials. West Conshohocken: ASTM International, 2017b.

ANDRADY, A. L. et al. Effects of increased solar ultraviolet radiation on materials. Journal of Photochemistry and Photobiology. B, Biology, v. 46, p. 96-103, 1998.

ANGRIZANI, C. C. et al. Analysis of curaua/glass hybrid interlayer laminates. Journal of Reinforced Plastics and Composites, v. 33, n. 5, p. 472-478, 2014.

ASHBY, M. F.; JOHNSON, K. Materials and design: the art and science of material selection in product. Oxford: Elsevier; 2014.

AZWA, Z. N. et al. A review on the degradability of polymeric composites based on natural fibres. Materials & Design, v. 47, p. 424-442, 2013.

BELEC, L. et al. Comparative effects of humid tropical weathering and artificial aging on a model composite properties from nano- to macro-scale. Composites. Part A, Applied Science and Manufacturing, v. 68, p. 235- 241, 2015.

CHAN, C. M. et al. Mechanical and physical stability of polyhydroxyalkanoate (PHA)-based wood plastic composites (WPCs) under natural weathering. Polymer Testing, v. 73, p. 214-221, 2019.

DAS, S. Mechanical and water swelling properties of waste paper reinforced unsaturated polyester composites. Construction & Building Materials, v. 138, p. 469-478, 2017.

FARUK, O. et al. Biocomposites reinforced with natural fibers. Progress in Polymer Science, v. 37, p. 1552-1596, 2012.

LIU, A. et al. A review of municipal solid waste environmental standards with a focus on incinerator residues. International Journal of Sustainable Built Environment, v. 4, p. 165- 188, 2015.

MAZZANTI, V.; MOLLICA, F. Bending properties of wood flour filled polyethylene in wet environment. Procedia Engineering, v. 200, p. 68-72, 2017.

MEJRI, M. et al. Hygrothermal aging effects on mechanical and fatigue behaviors of a short natural-fiber-reinforced composite. International Journal of Fatigue, v. 108, p. 96-108, 2018.

PENCZEK, P.; CZUB, P.; PIELICHOWSKI, J. Unsaturated polyester resins: chemistry and technology. In: AMÉDURI, B. Crosslinking in materials science: technical applications. Berlin: Springer, 2005. p. 1-95. Advances in Polymer Science book series.

PORTAL RESÍDUOS SÓLIDOS. Reciclagem industrial de papel. 2018. Available from: <http://www.portalresiduos solidos.com/reciclagem-de-papel-2/#more-2030>. Access in: 10 Mar 2018.

PRAMBAUERA, M.; PAULIK, C.; BURGSTALLER, C. The influence of paper type on the properties of structural paper – polypropylene composites. Composites. Part A, Applied Science and Manufacturing, v. 74, p. 107-113, 2015.

RAQUEZ, J.-M. et al. Thermosetting (bio)materials derived from renewable resources: a critical review. Progress in Polymer Science, v. 35, p. 487-509, 2010.

SCALICE, R. K.; BECKER, D.; SILVEIRA, R. C. Developing a new compatibility table for design for recycling. Product: Management & Development, v. 7, n. 2, p. 141-148, 2009.

SILVA, C. B. et al. Effect of natural ageing on the properties of recycled polypropylene/ethylene vinyl acetate/wood flour composites. Revista Matéria, v. 22, n. 2, p. 1-12, 2017.

TWE, M. M.; LIAO, K. Durability of bamboo-glass fiber reinforced polymer matrix hybrid composites. Composites Science and Technology, v. 63, p. 375-387, 2003.

ZIVKOVIC, I. et al. Influence of moisture absorption on the impact properties of flax, basalt and hybrid flax/basalt fiber reinforced green composites. Composites. Part B, Engineering, v. 111, p. 148-164, 2017.

5e8f25980e8825f17c6e28b9 pmd Articles
Links & Downloads

Product

Share this page
Page Sections